Pump release and lubrication system and related equipment - RF10
Brand: Fluydinamic
Model: GD21.11CR5STC
Serial No.: 06.24
Year: 2006
Water softening system in external room, adjacent to compressor room.
compressors.
THIRD PARTY PROPERTY: Mixing unit
For details see catalogue and expertise report available in the documents section.
Note 1: Disposal of materials/waste in the plant is the responsibility of the buyer.
This disposal must be carried out in a workmanlike manner in accordance with current
legislation.
Note 2: For the sale, a declaration by the seller that the original documentation is not
original documentation, which has not been identified, the seller's declaration of compliance with the laws in force. This declaration is not available at the moment. Therefore, for the present goods it is not
Therefore, direct purchase by end users is not permissible.
Note 3: At the end of collection of the goods, in addition to the restoration of any damage caused
Note 3: On completion of the collection of the goods, in addition to repairing any damage caused to the property, the safety condition of the property shall be restored.
Aspiration system not active - IMP3
(new foundry department where the press was being installed: Italpresse ip 2150 sc)
Note 1: Disposal of materials/waste present in the system is the responsibility of the purchaser. Such disposal must be carried out in a workmanlike manner in accordance with current legislation.
Note 2: For the sale, the original documentation, which has not been identified, must be accompanied by the vendor's declaration of compliance with the laws in force, a declaration which is not currently available. Therefore direct purchase by end users is not permissible for this good.
Note 3: At the end of the collection of the goods, in addition to the restoration of any damage caused to the property, the safety conditions of the property must be restored.
Oil skimmer plant with evaporation tower - IMP4
Note 1: Disposal of materials/waste in the system is the responsibility of the purchaser. This disposal must be carried out in a workmanlike manner in accordance with the applicable legislation.
Note 2: For the sale, the original documentation, which has not been identified, must be accompanied by the seller's declaration that it complies with the laws in force, a declaration which is not currently available. Therefore direct purchase by end users is not permissible for this good.
Note 3: At the end of the collection of the goods, in addition to the restoration of any damage caused to the property, the safety conditions of the property must be restored.
Mechanical workshop - machining department (From OMLAV1 to OMLAV30, OMLAV32, OMLAV33, from OMLAV35 to OMLAV40, OMLAV43)
- workbench with 2 vices
- grit profi grinder
- no. 3 racks (excluding various spare material for machines, property of third parties)
- blue cabinets with various equipment and materials
- stonemason mc800
- trolley
- workbench with wheels and various tools. power tools.
- chest of drawers with wheels with power tools
- blue cabinet with various tools
- press em330 mod. 901bs matr. 831 year 1995
- cem electrode welder
- refrigerator freezer
- tank for washing pieces
- nr 2 empty grey cabinets and an empty blue cabinet
- lampoblast sandblasting machine (out of use).
- green tub for collecting processing waste. scrap
- trolley with nr 2 battery chargers
- karker floor washer mod bd750
- 2-bay, 2-storey blue shelving unit containing machine parts (discarded equipment). grinder discs, adhesive tapes (excluding spare parts and stock which are the property of third parties)
- grey 5-shelf shelf with grinding tapes and sheets. (excluding spare parts and stocks which are the property of third parties)
- 3-bay 3-shelf shelf with various material (consumables are the property of tematrade srl)
- machine for testing code no. 103. machine specifically made for testing the tightness of radiators. there are no technical documents and certifications. (machine to be adapted to safety standards).
- machine to assemble radiators code 85 -pr0161. no technical documents and certifications available. (machine to be adapted to safety standards).
- rack for various materials. (excluding spare parts and consumables, which are the property of third parties).
- green bench
- three-part cabinet
- tumbler with sound-proof booth (self-built). (non-compliant machine to be adapted to safety standards). technical documentation not included.
- double grinder with control panel brulli spa (year 1999 order e19012/001)
- machine with 2 drilling and tapping heads for caps with drill matic working unit. machine of recent construction. brand not detectable (only the electric panel plate is present), ce plate not detectable. technical documentation not detectable.
- first aid office: couch, chair, small table, cabinet, first aid bags, washbasin and water heater styleboyler thermo-furnishing. made of transportable monobloc in blue painted steel.
- carmeccanica lifting platform 1000kg capacity.
- n°2 metal banquet conveyor belts
- manual assembling or disassembling machine code 112 pro164. there are no technical documents and certifications. (machine to be adapted to safety standards).
- oroma drilling machine for boomerang product. no relevant technical documentation present.
- manual test bench no relevant technical documentation.
- workbench
- no. 4 lifting platforms
- manual assembly or disassembly machine code 163. no technical documents and certifications present.(machine to be adapted to safety standards.)
- office mechanical working department in blue painted steel and glass with: n°2 desks with drawers n°2 chairs, pc workstation complete with philips monitor, keyboard, mouse, lexmarck printer, brown cabinet, paper roll holder, blackboard, lamp.
Notes: The purchaser may only collect the furniture once the contents of the storerooms have been collected by third parties, if they are still present at the time of collection. Machinery to be adapted to current standards. The documentation accompanying the machines is not noted. Vendor's declaration required, currently not available. Therefore direct purchase by end users is not permissible for this lot.
Grinding bench with suction Enercom impianti - VER1
Note: For sale, the seller's declaration of compliance with the laws in force must be attached to the original documentation. This declaration is not currently available. Therefore, direct purchase by end users is not admissible for this lot.
Workshop office paint shop - VER23
- laboratory office accessible from the painting area containing: nr 1 blue/grey 3-door wardrobe
- nr 3 chairs
- nr 1 desk with workstation complete with printer brother hl-5250dn
- nr 1 executive chair nr 1 chair with wheels
- nr 1 low white wardrobe with 2 closed compartments, 2 drawers
- nr 1 low white wardrobe with sliding doors
- nr 1 high wardrobe with shutter and 4 doors
- nr 1 oven for heatingomod me320 t.max1100 c°
- nr 2 thermostatic stove memmert
- nr 1 high cupboard with glass and laminated doors
- nr 1 sink with support
- nr 1 low fridge
- nr 1 radiator
- nr 1 wardrobe for dpi storage (outside) various objects for chemical laboratory
Notes: Not recorded for goods that require documentation. For the sale, the seller's declaration must be attached to the original documentation, certifying its compliance with the laws in force. Declaration not releasable at the moment. Therefore, direct purchase by end users is not admissible for this lot.
Gear shaping machine - VER24
Brand: Ama
Serial no.: als06316500
with printer
Notes: The machine needs a certificate of conformity to be marketed. This certificate is not available at present. Therefore, this lot is not eligible for direct purchase by end users.
Data considered correct but not binding since they are not integrated in the contractual conditions.
Pump release and lubrication system and related equipment - RF10
Brand: Fluydinamic
Model: GD21.11CR5STC
Serial No.: 06.24
Year: 2006
Water softening system in external room, adjacent to compressor room.
compressors.
THIRD PARTY PROPERTY: Mixing unit
For details see catalogue and expertise report available in the documents section.
Note 1: Disposal of materials/waste in the plant is the responsibility of the buyer.
This disposal must be carried out in a workmanlike manner in accordance with current
legislation.
Note 2: For the sale, a declaration by the seller that the original documentation is not
original documentation, which has not been identified, the seller's declaration of compliance with the laws in force. This declaration is not available at the moment. Therefore, for the present goods it is not
Therefore, direct purchase by end users is not permissible.
Note 3: At the end of collection of the goods, in addition to the restoration of any damage caused
Note 3: On completion of the collection of the goods, in addition to repairing any damage caused to the property, the safety condition of the property shall be restored.
Aspiration system not active - IMP3
(new foundry department where the press was being installed: Italpresse ip 2150 sc)
Note 1: Disposal of materials/waste present in the system is the responsibility of the purchaser. Such disposal must be carried out in a workmanlike manner in accordance with current legislation.
Note 2: For the sale, the original documentation, which has not been identified, must be accompanied by the vendor's declaration of compliance with the laws in force, a declaration which is not currently available. Therefore direct purchase by end users is not permissible for this good.
Note 3: At the end of the collection of the goods, in addition to the restoration of any damage caused to the property, the safety conditions of the property must be restored.
Oil skimmer plant with evaporation tower - IMP4
Note 1: Disposal of materials/waste in the system is the responsibility of the purchaser. This disposal must be carried out in a workmanlike manner in accordance with the applicable legislation.
Note 2: For the sale, the original documentation, which has not been identified, must be accompanied by the seller's declaration that it complies with the laws in force, a declaration which is not currently available. Therefore direct purchase by end users is not permissible for this good.
Note 3: At the end of the collection of the goods, in addition to the restoration of any damage caused to the property, the safety conditions of the property must be restored.
Mechanical workshop - machining department (From OMLAV1 to OMLAV30, OMLAV32, OMLAV33, from OMLAV35 to OMLAV40, OMLAV43)
- workbench with 2 vices
- grit profi grinder
- no. 3 racks (excluding various spare material for machines, property of third parties)
- blue cabinets with various equipment and materials
- stonemason mc800
- trolley
- workbench with wheels and various tools. power tools.
- chest of drawers with wheels with power tools
- blue cabinet with various tools
- press em330 mod. 901bs matr. 831 year 1995
- cem electrode welder
- refrigerator freezer
- tank for washing pieces
- nr 2 empty grey cabinets and an empty blue cabinet
- lampoblast sandblasting machine (out of use).
- green tub for collecting processing waste. scrap
- trolley with nr 2 battery chargers
- karker floor washer mod bd750
- 2-bay, 2-storey blue shelving unit containing machine parts (discarded equipment). grinder discs, adhesive tapes (excluding spare parts and stock which are the property of third parties)
- grey 5-shelf shelf with grinding tapes and sheets. (excluding spare parts and stocks which are the property of third parties)
- 3-bay 3-shelf shelf with various material (consumables are the property of tematrade srl)
- machine for testing code no. 103. machine specifically made for testing the tightness of radiators. there are no technical documents and certifications. (machine to be adapted to safety standards).
- machine to assemble radiators code 85 -pr0161. no technical documents and certifications available. (machine to be adapted to safety standards).
- rack for various materials. (excluding spare parts and consumables, which are the property of third parties).
- green bench
- three-part cabinet
- tumbler with sound-proof booth (self-built). (non-compliant machine to be adapted to safety standards). technical documentation not included.
- double grinder with control panel brulli spa (year 1999 order e19012/001)
- machine with 2 drilling and tapping heads for caps with drill matic working unit. machine of recent construction. brand not detectable (only the electric panel plate is present), ce plate not detectable. technical documentation not detectable.
- first aid office: couch, chair, small table, cabinet, first aid bags, washbasin and water heater styleboyler thermo-furnishing. made of transportable monobloc in blue painted steel.
- carmeccanica lifting platform 1000kg capacity.
- n°2 metal banquet conveyor belts
- manual assembling or disassembling machine code 112 pro164. there are no technical documents and certifications. (machine to be adapted to safety standards).
- oroma drilling machine for boomerang product. no relevant technical documentation present.
- manual test bench no relevant technical documentation.
- workbench
- no. 4 lifting platforms
- manual assembly or disassembly machine code 163. no technical documents and certifications present.(machine to be adapted to safety standards.)
- office mechanical working department in blue painted steel and glass with: n°2 desks with drawers n°2 chairs, pc workstation complete with philips monitor, keyboard, mouse, lexmarck printer, brown cabinet, paper roll holder, blackboard, lamp.
Notes: The purchaser may only collect the furniture once the contents of the storerooms have been collected by third parties, if they are still present at the time of collection. Machinery to be adapted to current standards. The documentation accompanying the machines is not noted. Vendor's declaration required, currently not available. Therefore direct purchase by end users is not permissible for this lot.
Grinding bench with suction Enercom impianti - VER1
Note: For sale, the seller's declaration of compliance with the laws in force must be attached to the original documentation. This declaration is not currently available. Therefore, direct purchase by end users is not admissible for this lot.
Workshop office paint shop - VER23
- laboratory office accessible from the painting area containing: nr 1 blue/grey 3-door wardrobe
- nr 3 chairs
- nr 1 desk with workstation complete with printer brother hl-5250dn
- nr 1 executive chair nr 1 chair with wheels
- nr 1 low white wardrobe with 2 closed compartments, 2 drawers
- nr 1 low white wardrobe with sliding doors
- nr 1 high wardrobe with shutter and 4 doors
- nr 1 oven for heatingomod me320 t.max1100 c°
- nr 2 thermostatic stove memmert
- nr 1 high cupboard with glass and laminated doors
- nr 1 sink with support
- nr 1 low fridge
- nr 1 radiator
- nr 1 wardrobe for dpi storage (outside) various objects for chemical laboratory
Notes: Not recorded for goods that require documentation. For the sale, the seller's declaration must be attached to the original documentation, certifying its compliance with the laws in force. Declaration not releasable at the moment. Therefore, direct purchase by end users is not admissible for this lot.
Gear shaping machine - VER24
Brand: Ama
Serial no.: als06316500
with printer
Notes: The machine needs a certificate of conformity to be marketed. This certificate is not available at present. Therefore, this lot is not eligible for direct purchase by end users.
©2019 Mercury Auctions S.r.l. a socio unico - V.A.T. Number 04126010166 - REA BG-437472 - Share Capital € 50.000,00
PRIVACY POLICY | COOKIE POLICY | PERSONAL DATA PROCESSING
CORPORATE
----